Now then,just got hold of 4 old super compact optonics,won`t go into too much detail of what they`ll be getting but it`ll be at least 3 advancements from how they were originally...
It`ll be a long drawn out project but will put vids up on how they progress so might take a year to complete but am in no rush..
just a start to the front case features and better tone quality ....
http://s215.photobucket.com/albums/cc122/timbernot/?action=view&current=SDC10018-1.mp4

back soon i hope,ps might need some extra bits and bobs for em too

is it me but is that the most mad vid i have seen your defo in your own cult of what to vid ps you could of got a better tone runner i mean come on a old bent packet of rizla still dont get the point

There is no point to get joe..i dont want to go into the extras they`ll be receiving..maybe when completed there might be a point fella and maybe someone might be interested as the fishing is a bit slow at the mo..ps,got all 4 oppos for less than 75 quid..it`ll be criminal not to soup em

Timber i'll have them when there done fella unless someone else has first grabs

These are not for sale bri but if you aquire the bits i`1l be sorting in this thread as it gets updated, to bring these old school alarms up to date.. and into the future ,i`ll gladly put em together for you m8 sometime

Nice one pal
Santas bringing me new pits and rods my eldest lad is having my old ones, feck he's 5foot 7 now and he's only 10 he be as big as you in a few years but much better looking
Some disasters in moving down here but all's well now

"he be as big as you in a few years but much better looking...."


Impossible !


For joe,change rizla for silver knife...

click the pic

receiver has detachable ear piece which is near the camera mic to pick up the tone from the ear-piece..coming along nicely


some more stuff to finish then back onto em later in the week

Changed the inside red led for a white led to the detector and where the top screw for the pcb is inside..that is now removed and a very small hole is drilled through to the front case and filled with clear glue giving the effect of a night light from the source already being used inside,pretty hard to see in this vid but again am amazed...lots more extras to come yet

Right,decided to change the internal led back to another more modern hyperbrite red led instead..put an eye type device over the lens for night light from the red led being used inside which is spot on(a ambient light but cant be seen for miles),diverted the antenna from the transmitter to the ext.out-put socket..where an antenna then is plugged in instead for better remote reception(no need for that socket for sounder out-put now anyway)
Fitted new toggle switch too,where it cant be turned on in carriage..only off
Will get the other 3 alarms up to this state before adding at least another 3 extras...looking good





click the pic below